Banner
Turcon® Variseal® W2
Tìm sản phẩm
Giỏ hàng 0
Sản phẩm
Số lượng
Loại sản phẩm
Thương hiệu
Part No.
Kích thước lắp đặt
  • Đường kính trong ID
    mm
  • Đường kính ngoài OD
    mm
  • Chiều cao phốt H1
    mm
  • Chiều cao khe lắp H2
    mm

Turcon® Variseal® W2

Turcon® Variseal® W2 is a single acting seal consisting of a U-shaped jacket and a corrosion resistant Slantcoil® spring.

Mô tả thương mại

Turcon® Variseal® W2 is a single acting seal consisting of a U-shaped jacket and a corrosion resistant Slantcoil® spring. The Slantcoil® spring in the Variseal® W2 provides an almost constant load irrespective of hardware tolerances, eccentricity and seal wear. At low and zero pressure, the metal spring provides the primary sealing force. As the system pressure increases, the main sealing force is achieved by the system pressure and ensures a tight seal from zero to high pressure.

Cài đặt và xử lý

Turcon® Variseal® W2 is a single acting seal consisting of a U-shaped jacket and a corrosion resistant Slantcoil® spring. The Slantcoil® spring in the Variseal® W2 provides an almost constant load irrespective of hardware tolerances, eccentricity and seal wear. At low and zero pressure, the metal spring provides the primary sealing force. As the system pressure increases, the main sealing force is achieved by the system pressure and ensures a tight seal from zero to high pressure. The possibility of matching suitable materials for the seal and the spring allows use in a wide range of applications going beyond the field of hydraulics, e.g. in the chemical and electronics industry. Variseal® W2 seals can be installed in grooves to AS4716 and ISO 3771. The seal can only be installed to a limited extent in closed grooves. 

Kích thước lắp đặt

Thuộc tính vật liệu

  • Pressure :
    • For static loads : 40 MPa
    • For dynamic loads : 20 MPa
  • Speed :
    • Reciprocating : Up to 15 m/s
    • Rotating : Up to 1.27 m/s
  • Temperature : -70 °C to +260 °C
  • Media : Virtually all fluids, chemicals and gases Clearance : The maximum permissible radial clearance Smax. is shown in the table on the next page as a function of the operating pressure and functional diameter.

Khả năng niêm phong

  • Suitable for reciprocating and light duty rotary movement
  • Constant initial squeeze of spring over a large control area
  • Interchangeable with O-Ring and Back-up Ring in most cases